142. Haque, M.Z., Yoon, J.W. “Stress based prediction of
formability and failure in incremental sheet forming”(2015) International
Journal of Material Forming, 9 (3), pp. 413-421
141. Dick, R.E., Yoon, J.W., Stoughton, T.B.
“Path-independent forming limit models for multi-stage forming processes”(2015)
International Journal of Material Forming, 9(3),pp. 327-337
140. Taherizadeh, A., Green, D.E., Yoon, J.W. “A
non-associated plasticity model with anisotropic and nonlinear kinematic
hardening for simulation of sheet metal forming”(2015) International Journal of
Solids and Structures, . Article in Press.
139. Yoon, J.W. “Metal forming - Challenges in constitutive and fracture modeling”(2015) International Journal of Plasticity, 75, p. 1.
138. Lou, Y., Yoon, J.W.“Anisotropic behavior in
plasticity and ductile fracture of an aluminum alloy”(2015) Key Engineering
Materials, 651-653, pp. 163-168.
137. De Almeida Grácio, J.J., Vincze, G., Yoon, J.W.,
Cardoso, R.P.R., Rauch, E.F., Barlat, F.G. “Modeling the Effect of Asymmetric
Rolling on Mechanical Properties of Al-Mg Alloys”(2015) Steel Research
International, 86 (8), pp. 922-931.
136. Paulino, M., Yoon, J.W. “Study on Yield Function and
Plastic Potential under Non-Associated Flow for Accurate Earing Prediction in
Cup Drawing”(2015) Steel Research International, 86 (8), pp. 852-860.
135. Hussein, R.D., Ruan, D., Yoon, J.W. “An Experimental
study of square aluminium tubes with honeycomb core subjected to quasi-Static
compressive loads”(2015) Key Engineering Materials, 626, pp. 91-96. Cited 1
time.
134. Lee, E.-H., Yang, D.-Y., Yoon, J.W., Yang,
W.-H.“Numerical modeling and analysis for forming process of dual-phase 980
steel exposed to infrared local heating”(2015) International Journal of Solids
and Structures, 75-76, pp. 211-224.
133. Whan Yoon, J., Hodgson, P., Beynon, J.H. “Editorial:
NUMISHEET2014 Special Issue”(2015) Steel Research International, 86 (8), p.
851.
132. Dick, R.E., Yoon, J.W. “Wrinkling during Cup Drawing
with NUMISHEET2014 Benchmark Test”(2015) Steel Research International, 86 (8),
pp. 915-921.
131. Khan, A.S., Liu, J., Yoon, J.W., Nambori, R. “Strain
rate effect of high purity aluminum single crystals: Experiments and
simulations”(2015) International Journal of Plasticity, 67, pp. 39-52. Cited 5
times.
130. Kim, J.-B., Yoon, J.W.“Necking behavior of AA
6022-T4 based on the crystal plasticity and damage models” (2015) International
Journal of Plasticity, 73, art. no. 1938, pp. 3-23.
129. Seong, D.Y., Haque, M.Z., Kim, J.B., Stoughton,
T.B., Yoon, J.W.“Suppression of necking in incremental sheet
forming”(2014) International Journal of Solids and Structures, 51 (15-16), pp.
2840- 2849. Cited 2 times.
128. Stoughton, T.B., Yoon, J.W. “Stress-Based Forming
Limit Curves”(2014) Comprehensive Materials Processing, 1, pp. 71-84.
127. Lou, Y., Yoon, J.W., Huh, H. “Modeling of shear
ductile fracture considering a changeable cut-off value for stress triaxiality”(2014)
International Journal of Plasticity, 54, pp. 56-80. Cited 29 times.
126. Yoon, J.W., Barlat, F. “In honor of Kwansoo
Chung”(2014) International Journal of Plasticity, 58, pp. 1-2.
125. Safaei, M., Yoon, J.W., De Waele, W. “Study on the
definition of equivalent plastic strain under non-associated flow rule for
finite element formulation”(2014) International Journal of Plasticity, 58, pp.
219-238. Cited 7 times.
124. Yoon, J.W., Lou, Y., Yoon, J., Glazoff, M.V.
“Asymmetric yield function based on the stress invariants for pressure
sensitive metals”(2014) International Journal of Plasticity, 56, pp. 184-202.
Cited 16 times.
123. Manach, P.Y., Thuillier, S., Yoon, J.W., Coër, J.,
Laurent, H.“Kinematics of Portevin-Le Chatelier bands in simple
shear”(2014) International Journal of Plasticity, 58, pp. 66-83. Cited 5 times.
122. Caseiro, J.F., Valente, R.A.F., Andrade-Campos, A.,
Yoon, J.W.“On the elasto-plastic buckling of Integrally Stiffened
Panels (ISP) joined by Friction Stir Welding (FSW): Numerical
simulation and optimization algorithms”(2013) International Journal of
Mechanical Sciences, 76, pp. 49-59. Cited 8 times.
121. Kim, J.-B., Yoon, J.W. “Analysis of the necking
behaviors with the crystal plasticity model using 3-dimensional shaped
grains”(2013) Advanced Materials Research, 684, pp. 357-361. Cited 1 time.
120. Kim, J.-B., Yang, D.-Y., Yoon, J.W. “Bifurcation
Instability of sheet metal during spring-back”(2013) Philosophical Magazine, 93
(15), pp. 1914-1935. Cited 3 times.
119. Yoon, J.W., Stoughton, T.B. “Editorial: In honor of
Robert H. Wagoner”(2013) International Journal of Plasticity, 45, pp. 1-2.
118. Kumar, R., Singh, I.V., Mishra, B.K., Cardoso, R.,
Yoon, J.W.“A comparison of EFGM and FEM for nonlinear solid
mechanics problems”(2013) Key Engineering Materials, 535-536, pp.
434-437.
117. Kacem, A., Krichen, A., Manach, P.Y., Thuillier, S.,
Yoon, J.W.“Failure prediction in the hole-flanging process of
aluminium alloys”(2013) Engineering Fracture Mechanics, 99, pp.
251-265. Cited 11 times.
116. Graça, A., Cardoso, R.P.R., Yoon, J.W. “Subspace
analysis to alleviate the volumetric locking in the 3D solid-shell EFG
method”(2013) Journal of Computational and Applied Mathematics, 246, pp.
185-194.
115. Lou, Y., Huh, H., Yoon, J.W. “Consideration of
strength differential effect in sheet metals with symmetric yield
functions”(2013) International Journal of Mechanical Sciences, 66, pp. 214-223.
Cited 10 times.
114. Stoughton, T.B., Yoon, J.W. “Path independent
forming limits in strain and stress spaces”(2012) International Journal of
Solids and Structures, 49 (25), pp. 3616-3625. Cited 22 times.
113. Steglich, D., Jeong, Y., Andar, M.O., Kuwabara, T.
“Biaxial deformation behaviour of AZ31 magnesium alloy: Crystal-plasticity-
based prediction and experimental validation”(2012) International Journal of
Solids and Structures, 49 (25), pp. 3551-3561. Cited 20 times.
112. Kim, E.-Y., Choi, S.-H., Shin, E.-J., Yoon, J.
“Simulation of earing behaviors in bake hardening steel exhibiting a strong
off-γ-fiber component”(2012) International Journal of Solids and Structures, 49
(25), pp. 3573-3581. Cited 5 times.
111. Kyriakides, S., Barlat, F., Yoon, J.W. Preface
(2012) International Journal of Solids and Structures, 49 (25), p. 3487.
110. Graça, A., Cardoso, R.P.R., Yoon, J.W. “Subspace
analysis to alleviate the volumetric locking in the 3D solid-shell EFG method”(2012)
Journal of Computational and Applied Mathematics, . Article in Press.
109. Kim, J.-B., Seo, W.-S., Hong, S.-H., Yoon, J.W. “Prediction
of necking and fracture based on the crystal plasticity”(2012) Steel Research
International, SPL. ISSUE, pp. 1187-1190.
108. Yoon, J.H., Cazacu, O., Yoon, J.W., Dick, R.E. “New
distortional hardening model capable of predicting eight ears for textured
aluminum sheet”(2011) AIP Conference Proceedings, 1353, pp. 1399-1404.
107. Kitayama, K., Cardoso, R.P.R., Yoon, J.W., Uemor,
T., Yoshida, F. “A comparison between the Total Lagrangian Scheme (TLS)
and the Predominat Twin Reorientation (PTR) methods to analyze
the twinning deformations in a rate dependent crystal plasticity model”(2011)
Computational Plasticity XI - Fundamentals and Applications, COMPLAS XI, pp. 1491-1497.
106. Taherizadeh, A., Green, D.E., Yoon, J.W. “Evaluation
of advanced anisotropic models with mixed hardening for general associated and
non-associated flow metal plasticity”(2011) International Journal of
Plasticity, 27 (11), pp. 1781-1802. Cited 25 times.
105. Yang, D.-Y., Lim, T.W., Son, Y., Barlat, F., Yoon,
J.W.“Gripless nanotension test for determination of nano-scale properties”(2011)
International Journal of Plasticity, 27 (10), pp. 1527-1536. Cited 5 times.
104. Stoughton, T.B., Yoon, J.W. “Paradigm change:
Alternate approaches to constitutive and necking models for sheet metal forming”(2011)
AIP Conference Proceedings, 1383, pp. 15-34.
103. Kim, E.-Y., Choi, S.-H., Yoon, J.W.“Effect of
off-γ-fiber texture components on R-value anisotropy and cup-drawing behavior
in high-strength steel sheets”(2011) AIP Conference Proceedings, 1383, pp.
360-364.
102. Yoon, J.W., Dick, R.E., Barlat, F. “A new analytical
theory for earing generated from anisotropic plasticity”(2011) International
Journal of Plasticity, 27 (8), pp. 1165-1184. Cited 16 times.
101. Caseiro, J.F., Valente, R.A.F., Andrade-Campos, A.,
Yoon, J.W.“Elasto-plastic buckling of integrally stiffened panels
(ISP): An optimization approach for the design of cross-section profiles”(2011) Thin-Walled Structures, 49 (7), pp. 864-873. Cited
7 times.
100. Yoon, J.-H., Cazacu, O., Yoon, J.W.“Strain-rate
potential based elastic/plastic anisotropic model for metals displaying
tension-compression asymmetry”(2011) Computer Methods in Applied Mechanics and
Engineering, 200 (23-24), pp. 1993-2004. Cited 1 time.
99. Stoughton, T.B., Yoon, J.W. “A new approach for
failure criterion for sheet metals”(2011) International Journal of Plasticity,
27 (3), pp. 440-459. Cited 64 times.
98. Kuwabara, T., Hashimoto, K., Iizuka, E., Yoon, J.W. “Effect
of anisotropic yield functions on the accuracy of hole expansion simulations”(2011)
Journal of Materials Processing Technology, 211 (3), pp. 475-481. Cited 37
times.
97. Kim, K.J., Yang, D.Y., Yoon, J.W. “Mechanical
properties and microstructure of AA1050 after ECAE (Equal channel angular
extrusion)”(2010) AIP Conference Proceedings, 1252, pp. 981-986.
96. Yoon, J.-H., Cazacu, O., Whan Yoon, J., Dick, R.E.“Earing
predictions for strongly textured aluminum sheets”(2010) International Journal
of Mechanical Sciences, 52 (12), pp. 1563-1578. Cited 16 times.
95. Hashimoto, K., Kuwabara, T., Iizuka, E., Yoon, J.-W.“Effect
of anisotropie yield functions on the accuracy of hole expansion simulations
for 590 MPa grade steel sheet”(2010) Tetsu-To-Hagane/Journal of the Iron and
Steel Institute of Japan, 96 (9), pp. 557-563. Cited 17 times.
94. Kim, K.J., Yang, D.Y., Yoon, J.W. “Microstructural
evolution and its effect on mechanical properties of commercially pure aluminum
deformed by ECAE (Equal Channel Angular Extrusion) via routes A and C”(2010)
Materials Science and Engineering A, 527 (29-30), pp. 7927-7930. Cited 13
times.
93. Choi, S.-H., Kim, D.-W., Yang, H.-S., Han, S.-H.,
Yoon, J.W.“Cup-drawing behavior of high-strength steel sheets containing
different volume fractions of martensite”(2010) AIP Conference Proceedings,
1252, pp. 168-172.
92. Yoon, J.W., Stoughton, T.B. “Modeling of directional
hardening based on non-associated flow for sheet forming”(2010) AIP Conference
Proceedings, 1252, pp. 161-167.
91. Gracio, J.J., Kim, H.J., Vincze, G., Panigrahi, B.B.,
Barlat, F., Rauch, E.F., Yoon, J.W. “Effect of asymmetric rolling on plastic
anisotropy of low carbon steels during simple shear tests”(2010) AIP Conference
Proceedings, 1252, pp. 181-184.
90. Cardoso, R.P.R., Yoon, J.W., Dick, R.E. “A new
axi-symmetric element for thin walled structures”(2010) AIP Conference Proceedings,
1252, pp. 260-266.
89. Rousselier, G., Barlat, F., Yoon, J.W. “A novel
approach for anisotropic hardening modeling. Part II: Anisotropic hardening in
proportional and non-proportional loadings, application to initially isotropic
material”(2010) International Journal of Plasticity, 26 (7), pp. 1029-1049.
Cited 22 times.
88. Cazacu, O., Ionescu, Ioan.R., Yoon, J.W.“Orthotropic
strain rate potential for the description of anisotropy in tension and
compression of metals”(2010) International Journal of Plasticity, 26 (6), pp.
887-904. Cited 26 times.
87. Cazacu, O., Yoon, J.-H., Yoon, J.-W. “New anisotropic
strain-rate potential for hexagonal metals”(2010) International Journal of
Material Forming, 3 (SUPPL. 1), pp. 227-230. Cited 1 time.
86. Alves de Sousa, R.J., Simões, F.J.P., Grácio, J.J.,
Yoon, J.-W.“A polycrystal model to evaluate mechanical properties of
asymmetrically rolled al sheets”(2010) International Journal of Material
Forming, 3 (SUPPL. 1), pp. 61-64.
85. Caseiro, J.F., Valente, R.A.F., Andrade-Campos, A.,
Yoon, J.W. “On an innovative optimization approach for the design of
cross-section profiles of integrally stiffened panels subjected to
elasto-plastic buckling deformation modes”(2010) International Journal of
Material Forming, 3 (SUPPL. 1), pp. 49-52.
84. Hashimoto, K., Kuwabara, T., Iizuka, E., Yoon, J.W.“Hole
expansion simulation of high strength steel sheet”(2010) International Journal
of Material Forming, 3 (SUPPL. 1), pp. 259-262. Cited 4 times.
83. Taherizadeh, A., Green, D.E., Ghaei, A., Yoon, J.-W.“A
non-associated constitutive model with mixed iso-kinematic hardening for finite
element simulation of sheet metal forming”(2010) International Journal of
Plasticity, 26 (2), pp. 288-309. Cited 42 times.
82. Yoon, J.W., Cardoso, R.P.R., Dick, R.E.“Puncture
fracture in an aluminum beverage can”(2010) International Journal of Impact
Engineering, 37 (2), pp. 150-160. Cited 5 times.
81. Cardoso, R.P.R., Yoon, J.W., Dick, R.E.“A new
axi-symmetric element for thin walled structures”(2010) Computational
Mechanics, 45 (4), pp. 281-296.
80. Simões, F.J.P., de Sousa, R.J.A., Grácio, J.J.A.,
Barlat, F., Yoon, J.W.“Effect of asymmetrical rolling and annealing on the
mechanical response of an AA1050-O sheet”(2009) International Journal of
Material Forming, 2 (SUPPL. 1), pp. 891-894. Cited 1 time.
79. Rousselier, G., Barlat, F., Yoon, J.W.“A novel
approach for anisotropic hardening modeling. Part I: Theory and its application
to finite element analysis of deep drawing”(2009) International Journal of
Plasticity, 25 (12), pp. 2383-2409. Cited 34 times.
78. Yoon, J.W., Bray, G.H., Valente, R.A.F., Childs,
T.E.R.“Buckling analysis for an integrally stiffened panel structure with a
friction stir weld”(2009) Thin-Walled Structures, 47 (12), pp. 1608-1622. Cited
27 times.
77. Rousselier, G., Barlat, F., Yoon, J.W.“A novel
approach for modeling of anisotropic hardening and non proportional loading
paths, application to finite element analysis of deep drawing”(2009)
International Journal of Material Forming, 2 (SUPPL. 1), pp. 367-370. Cited 3
times.
76. Korhonen, A.S., Manninen, T., Yoon, J.-W., Larkiola,
J.“Comparsion of forming and fracture limits of an aluminum alloy and
austenitic stainless steel”(2009) International Journal of Material Forming, 2
(SUPPL. 1), pp. 431-434. Cited 3 times.
75. Kim, K.-J., Yoon, J.W., Yang, D.-Y.“Development of
ultrafine-grained aluminum tubes using severe plastic deformation process”(2009)
Transactions of the Korean Society of Mechanical Engineers, A, 33 (10), pp.
1087-1090.
74. Glazoff, M.V., Rashkeev, S.N., Pyt'Ev, Y.P., Yoon,
J.-W., Sheu, S.“Interplay between plastic deformations and optical
properties of metal surfaces: A multiscale study” (2009) Applied
Physics Letters,
95 (8), art. no. 084106,
73. Yoon, J.W., Stoughton, T.B. “Exploring new horizons
of metal forming research”(2009) International Journal of Plasticity, 25 (9),
pp. 1609-1610. Cited 1 time.
72. Cardoso, R.P.R., Yoon, J.W. “Stress integration
method for a nonlinear kinematic/isotropic hardening model and its
characterization based on polycrystal plasticity”(2009) International Journal
of Plasticity, 25 (9), pp. 1684-1710. Cited 22 times.
71. Ahn, D.C., Yoon, J.W., Kim, K.Y. “Modeling of
anisotropic plastic behavior of ferritic stainless steel sheet”(2009)
International Journal of Mechanical Sciences, 51 (9-10), pp. 718-725. Cited 8
times.
69.Simões, F.J.P., De Sousa, R.J.A., Grácio, J.J.A.,
Barlat, F., Yoon, J.W.“Mechanical behavior of an asymmetrically rolled and
annealed 050-O heet”(2008) International Journal of Mechanical Sciences, 50
(9), pp. 1372-1380. Cited 17 times.
68.Cardoso, R.P.R., Yoon, J.W., Mahardika, M., Choudhry,
S., de Sousa, R.J.A., Valente, R.A.F.“Enhanced assumed strain (EAS) and assumed
natural strain (ANS) methods for one-point quadrature solid-shell elements”(2008)
International Journal for Numerical Methods in Engineering, 75 (2), pp.
156-187. Cited 82 times.
67.Yoon, J.W., Dick, R.E., Barlat, F. “Analytical
approach to predict anisotropic material properties from cup drawings”(2008)
International Journal of Material Forming, 1 (SUPPL. 1), pp. 301-304. Cited 2
times.
66.Kim, K.J., Yang, D.Y., Yoon, J.W.“Investigation of
microstructure characteristics of commercially pure aluminum during equal
channel angular extrusion”(2008) Materials Science and Engineering A, 485
(1-2), pp. 621-626. Cited 13 times.
65.Soare, S., Yoon, J.W., Cazacu, O.“On the use of
homogeneous polynomials to develop anisotropic yield functions with
applications to sheet forming”(2008) International Journal of Plasticity, 24
(6), pp. 915-944. Cited 39 times.
64.Stoughton, T.B., Yoon, J.W.“On the existence of
indeterminate solutions to the equations of motion under non-associated flow”(2008)
International Journal of Plasticity, 24 (4), pp. 583-613. Cited 18 times.
63.Yoon, J.W., Dick, R.E., Barlat, F., Hong, S.H. “On the
use of stress-based forming limit curve for forming and fracture”(2008) 9th
International Conference on Technology of Plasticity, ICTP 2008, pp. 708-722.
Cited 3 times.
62.Kim, J.-B., Yoon, J.-W., Yang, D.-Y.“An analysis of
springback with bifurcation behavior and its application to die design”(2008)
9th International Conference on Technology of Plasticity, ICTP 2008, pp.
1455-1460.
61.Ahn, D.C., Yoon, J.W., Chung, Y.J., Won, S.Y., Kim,
K.Y.“On the prediction of formability of ferritic stainless steel sheet”(2008)
9th International Conference on Technology of Plasticity, ICTP 2008, pp.
2225-2228.
60.Kim, K.J., Lee, S.U., Yang, D.Y., Yoon, J.W.“Development
of a tube-ECAE process to improve the mechanical properties of a metal tube”(2008)
9th International Conference on Technology of Plasticity, ICTP 2008, pp.
2295-2299. Cited 1 time.
59.Costa, A.S.L., Cardoso, R.P.R., Yoon, J.-W., De
Morais, A.B.“The force method to calculate stress intensity factors for
arbitrary meshes”(2007) Computational Plasticity - Fundamentals and
Applications, COMPLAS IX, (PART 2), pp. 733-736.
58.Soare, S., Yoon, J.W., Cazacu, O., Barlat, F. “Applications
of a recently proposed anisotropic yield function to sheet forming”(2007)
Advanced Methods in Material Forming: With 264 Figures and 37 Tables, pp.
131-149. Cited 5 times.
57.Cardoso, R.P.R., Yoon, J.-W.“One point quadrature
shell elements: A study on convergence and patch tests”(2007) Computational
Mechanics, 40 (5), pp. 871-883. Cited 13 times.
56.Kim, J.-H., Yoon, J.W., Yang, D.Y. “Compressive
instability phenomena during springback”(2007) AIP Conference Proceedings, 908,
pp. 619-624.
55.Dick, R.E., Yoon, J.W., Barlat, F.“Convolute cut-edge
design for a circular cup based on FEM and an analytical approach”(2007) AIP
Conference Proceedings, 908, pp. 673-678. Cited 1 time.
54.Valente, R.A.F., De Sousa, R.J.A., Jorge, R.M.N.,
Cardoso, R.P.R., Simões, F., Yoon, J.W., Grácio, J. “An overview of sheet metal
forming simulations with enhanced assumed strain elements”(2007) AIP Conference
Proceedings, 908, pp. 741-746.
53.Soare, S., Yoon, J.W., Cazacu, O.“On using homogeneous
polynomials to design anisotropic yield functions with tension/compression
symmetry/asymmetry”(2007) AIP Conference Proceedings, 908, pp. 607-612.
52.Cardoso, R.P.R., Yoon, J.-W., Grácio, J.J. “Material
models to study the bauschinger effect on an aluminum shear test specimen”(2007)
AIP Conference Proceedings, 908, pp. 679-684.
51.Yoon, J.W., Stoughton, T.B., Dick, R.E. “Earing
prediction in cup drawing based on non-associated flow rule”(2007) AIP
Conference Proceedings, 908, pp. 685-690. Cited 2 times.
50.Barlat, F., Yoon, J.W., Cazacu, O.“On linear
transformations of stress tensors for the description of plastic anisotropy”(2007)
International Journal of Plasticity, 23 (5), pp. 876-896. Cited 103 times.
49.Yoon, J.W. “Advances in metal forming: Experiments,
constitutive models and simulations”(2007) International Journal of Plasticity,
23 (3), pp. 343-344. Cited 1 time.
48.Alves de Sousa, R.J., Yoon, J.W., Cardoso, R.P.R.,
Fontes Valente, R.A., Grácio, J.J. “On the use of a reduced enhanced
solid-shell (RESS) element for sheet forming simulations”(2007) International
Journal of Plasticity, 23 (3), pp. 490-515. Cited 59 times.
47.Cardoso, R.P.R., Yoon, J.W., Valente, R.A.F. “Enhanced
one-point quadrature shell element for nonlinear applications”(2007)
International Journal for Numerical Methods in Engineering, 69 (3), pp.
627-663. Cited 21 times.
46.Yoon, J.W., Dick, R.E., Barlat, F.“Convolute cut-edge
design with a new anisotropic yield function for earless target cup in a
circular cup drawing”(2006) Materials Science Forum, 505-507 (PART 2), pp.
1297-1302.
45.Yoon, J.W., Chung, K., Pourboghrat, F., Barlat, F.“Design
optimization of extruded preform for hydroforming processes based on ideal
forming design theory”(2006) International Journal of Mechanical Sciences, 48
(12), pp. 1416-1428. Cited 9 times.
44.Alves de Sousa, R.J., Cardoso, R.P.R., Fontes Valente,
R.A., Yoon, J.-W., Grácio, J.J., Natal Jorge, R.M. “A new one-point quadrature
enhanced assumed strain (EAS) solid-shell element with multiple integration
points along thickness - Part II: Nonlinear applications”(2006) International
Journal for Numerical Methods in Engineering, 67 (2), pp. 160-188. Cited 78
times.
43.Yoon, J.W., Hong, S.H. “Modeling of aluminum alloy
sheets based on new anisotropic yield functions”(2006) Journal of Materials
Processing Technology, 177 (1-3), pp. 134-137. Cited 8 times.
42.Cardoso, R.P.R., Yoon, J.W., Valente, R.A.F. “A new
approach to reduce membrane and transverse shear locking for one-point quadrature
shell elements: Linear formulation”(2006) International Journal for Numerical
Methods in Engineering, 66 (2), pp. 214-249. Cited 40 times.
41.Stoughton, T.B., Yoon, J.W. “Review of Drucker's
postulate and the issue of plastic stability in metal forming”(2006)
International Journal of Plasticity, 22 (3), pp. 391-433. Cited 37 times.
40.Yoon, J.W., Barlat, F., Dick, R.E., Karabin, M.E. “Prediction
of six or eight ears in a drawn cup based on a new anisotropic yield function”(2006)
International Journal of Plasticity, 22 (1), pp. 174-193. Cited 123 times.
39.Cardoso, R.P.R., Yoon, J.W., Valente, R.A.F., Grácio,
J.J., Simões, F., Alves De Sousa, R.J. “A nonlinear kinematic hardening model
for the simulation of cyclic loading paths in anisotropic aluminum alloy sheets”(2005)
Computational Plasticity: Fundamentals and Applications - Proceedings of the
8th International Conference on Computational Plasticity, COMPLAS VIII, (PART
2), pp. 715-718.
38.Yoon, J.W., Barlat, F., Gracio, J.J., Rauch, E. “Anisotropic
strain hardening behavior in simple shear for cube textured aluminum alloy
sheets”(2005) International Journal of Plasticity, 21 (12), pp. 2426-2447.
Cited 49 times.
37.Stoughton, T.B., Yoon, J.W.“Sheet metal formability
analysis for anisotropic materials under non-proportional loading”(2005)
International Journal of Mechanical Sciences, 47 (12), pp. 1972-2002. Cited 45
times.
36.Gracio, J.J., Barlat, F., Rauch, E., Yoon, J.W., Picu,
R.C.“A review of the relationship between microstructural features and the
stress-strain behavior of metals”(2005) Materialwissenschaft und
Werkstofftechnik, 36 (10), pp. 572-577. Cited 2 times.
35.Brem, J.C., Barlat, F., Dick, R.E., Yoon, J.-W.“Characterizations
of aluminum alloy sheet materials numisheet 2005”(2005) AIP Conference Proceedings,
778 B, pp. 1179-1190. Cited 5 times.
34.Alves De Sousa, R.J., Cardoso, R.P.R., Valente,
R.A.F., Yoon, J.-W., Grácio, J.J., Natal Jorge, R.M.“Development of a one-point
quadrature EAS solid-shell element for sheet forming”(2005) AIP Conference
Proceedings, 778 A, pp. 757-761.
33.Dick, R.E., Yoon, J.W., Barlat, F.“Convolute cut-edge
design for an earless cup in cup drawing”(2005) AIP Conference Proceedings, 778
A, pp. 713-718.
32.Cardoso, R.P.R., Yoon, J.W.“One point quadrature shell
element with through-thickness stretch”(2005) AIP Conference Proceedings, 778
A, pp. 739-744.
31.Chung, K., Yoon, J.W. “Direct design method based on
ideal forming theory for hydroforming and flanging processes”(2005) AIP
Conference Proceedings, 778 A, pp. 40-48.
30.Cardoso, R.P.R., Yoon, J.-W.“One point quadrature
shell elements for sheet metal forming analysis”(2005) Archives of
Computational Methods in Engineering, 12 (1), pp. 3-66. Cited 14 times.
29.Barlat, F., Aretz, H., Yoon, J.W., Karabin, M.E.,
Brem, J.C., Dick, R.E.“Linear transfomation-based anisotropic yield functions”(2005)
International Journal of Plasticity, 21 (5), pp. 1009-1039. Cited 286 times.
28.Cardoso, R.P.R., Yoon, J.W.“One point quadrature shell
element with through-thickness stretch”(2005) Computer Methods in Applied
Mechanics and Engineering, 194 (9-11), pp. 1161-1199. Cited 31 times.
27.Alves de Sousa, R.J., Cardoso, R.P.R., Fontes Valente,
R.A., Yoon, J.-W., Grácio, J.J., Natal Jorge, R.M. “A new one-point quadrature
enhanced assumed strain (EAS) solid-shell element with multiple integration
points along thickness: Part I - Geometrically linear applications”(2005)
International Journal for Numerical Methods in Engineering, 62 (7), pp.
952-977. Cited 56 times.
26.Ryou, H., Chung, K., Yoon, J.-W., Han, C.-S., Youn,
J.R., Kang, T.J.“Incorporation of sheet-forming effects in crash simulations
using ideal forming theory and hybrid membrane and shell method”(2005) Journal
of Manufacturing Science and Engineering, Transactions of the ASME, 127 (1),
pp. 182-192. Cited 17 times.
25.Stoughton, T.B., Yoon, J.-W.“A pressure-sensitive
yield criterion under a non-associated flow rule for sheet metal forming”(2004)
International Journal of Plasticity, 20 (4-5), pp. 705-731. Cited 86 times.
24.Yoon, J.-W., Barlat, F., Dick, R.E., Chung, K., Kang,
T.J. “Plane stress yield function for aluminum alloy sheets - Part II: FE
formulation and its implementation”(2004) International Journal of Plasticity,
20 (3), pp. 495-522. Cited 136 times.
23.Barlat, F., Brem, J.C., Yoon, J.W., Chung, K., Dick,
R.E., Lege, D.J., Pourboghrat, F., Choi, S.-H., Chu, E. “Plane stress yield
function for aluminum alloy sheets - Part 1: Theory”(2003) International
Journal of Plasticity, 19 (9), pp. 1297-1319. Cited 599 times.
22.Barlat, F., Grácio, J., Yoon, J.-W., Rauch, E.F. “Texture,
microstructure and forming of aluminum alloy sheets”(2003) Materials Science
Forum, 426-432 (1), pp. 99-106.
21.Kim, J.B., Yoon, J.W., Yang, D.Y. “Investigation into
the wrinkling behaviour of thin sheets in the cylindrical cup deep drawing
process using bifurcation theory”(2003) International Journal for Numerical
Methods in Engineering, 56 (12), pp. 1673-1705. Cited 17 times.
20.Barlat, F., Yoon, J.W., Gracio, J.J., Dick, R.E. “Microstructure-based
constitutive modeling for the analysis and design of aluminium sheet forming
processes”(2002) Key Engineering Materials, 230-232, pp. 497-500.
19.Cardoso, R.P.R., Yoon, J.-W., Grácio, J.J., Barlat,
F., César De Sá, J.M.A.“Development of a one point quadrature shell element for
nonlinear applications with contact and anisotropy”(2002) Computer Methods in
Applied Mechanics and Engineering, 191 (45), pp. 5177-5206. Cited 50 times.
18.Yoon, J.-W., Pourboghrat, F., Chung, K., Yang, D.-Y. “Springback
prediction for sheet metal forming process using a 3D hybrid membrane/shell
method”(2002) International Journal of Mechanical Sciences, 44 (10), pp.
2133-2153. Cited 40 times.
17.Kim, J.B., Yoon, J.W., Yang, D.Y., Barlat, F.“Investigation
into wrinkling behavior in the elliptical cup deep drawing process by finite
element analysis using bifurcation theory”(2001) Journal of Materials
Processing Technology, 111 (1-3), pp. 170-174. Cited 19 times.
16.Kim, J.B., Yoon, J.W., Yang, D.Y. “Finite element analysis
of the wrinkling behavior in the elliptical cup deep drawing process”(2000)
European Congress on Computational Methods in Applied Sciences and Engineering,
ECCOMAS 2000, 18 p.
15.Yoon, J.W., Barlat, F., Dick, R.E. “Sheet metal
forming simulation for aluminum alloy sheets”(2000) SAE Technical Papers, .
Cited 1 time.
14.Kim, J.B., Yoon, J.W., Yang, D.Y. “Wrinkling
initiation and growth in modified Yoshida buckling test: finite element
analysis and experimental comparison”(2000) International Journal of Mechanical
Sciences, 42 (9), pp. 1683-1714. Cited 17 times.
13.Yoon, J.W., Barlat, F., Chung, K., Pourboghrat, F.,
Yang, D.Y. “Earing predictions based on asymmetric nonquadratic yield function”(2000)
International journal of plasticity, 16 (9), pp. 1075-1104. Cited 79 times.
12.Chung, K., Yoon, J.-W., Richmond, O. “Ideal sheet
forming with frictional constraints”(2000) International journal of plasticity,
16 (6), pp. 595-610. Cited 27 times.
11.Kim, J.-B., Yang, D.-Y., Yoon, J.-W., Barlat, F. “Effect
of plastic anisotropy on compressive instability in sheet metal forming”(2000)
International journal of plasticity, 16 (6), pp. 649-676. Cited 33 times.
10.Park, S.H., Yoon, J.W., Yang, D.Y., Kim, Y.H. “Optimum
blank design in sheet metal forming by the deformation path iteration method”(1999)
International Journal of Mechanical Sciences, 41 (10), pp. 1217-1232. Cited 62
times.
9.Yoon, J.W., Yang, D.Y., Chung, K. “Elasto-plastic
finite element method based on incremental deformation theory and continuum
based shell elements for planar anisotropic sheet materials”(1999) Computer
Methods in Applied Mechanics and Engineering, 174 (1-2), pp. 23-56. Cited 101
times.
8.Yoon, J.W., Yang, D.Y., Chung, K., Barlat, F. “General
elasto-plastic finite element formulation based on incremental deformation
theory for planar anisotropy and its application to sheet metal forming”(1999)
International journal of plasticity, 15 (1), pp. 35-67. Cited 62 times.
7.Lee, S.W., Yoon, J.W., Yang, D.Y. “Comparative
investigation into the dynamic explicit and the static implicit method for
springback of sheet metal stamping”(1999) Engineering Computations (Swansea,
Wales), 16 (3), pp. 347-373. Cited 13 times.
6.Yoon, J.W., Barlat, F., Chung, K., Pourboghrat, F.,
Yang, D.Y. “Influence of initial back stress on the earing prediction of drawn
cups for planar anisotropic aluminum sheets”(1998) Journal of Materials
Processing Technology, 80-81, pp. 433-437. Cited 17 times.
5.Yang, D.Y., Lee, S.W., Kim, J.B., Yoon, J.W., Lee, D.W.
“Holistic Design and Simulation System in Sheet Metal Forming Processes”(1998)
Metals and Materials International, 4 (4), pp. 715-722. Cited 1 time.
4.Chung, K., Barlat, F., Yoon, J.-W., Richmond, O., Brem,
J.C., Lege, D.J.“Yield and Strain Rate Potentials for Aluminum Alloy Sheet
Forming Design”(1998) Metals and Materials International, 4 (4), pp. 931-938.
Cited 1 time.
3.Lee, S.W., Yoon, J.W., Yang, D.Y. “A stress integration
algorithm for plane stress elastoplasticity and its applications to explicit
finite element analysis of sheet metal forming processes”(1998) Computers and
Structures, 66 (2-3), pp. 301-311. Cited 17 times.
2.Song, I.S., Yoo, D.J., Yoon, J.W., Yang, D.Y., Huh, H.,
Lee, J.H.“Finite-element analysis and design of binder wraps for
automobile sheet metal parts using surface boundary condition”(1995)
Journal of Materials Engineering and Performance, 4 (5), pp. 593-598. Cited 3 times.
1.Yoon, J.W.,
Song, I.S., Yang, D.Y., Chung, K., Barlat, F. “Finite element method for sheet
forming based on an anisotropic strain-rate
potential and the convected
coordinate system”(1995) International Journal of Mechanical Sciences, 37 (7),
pp. 733-752. Cited 37 times.